Lab Rules Apply - No Goofing AroundMaterials: pH meter, beaker, water bottle, A-K test samples
- Procedure:
- It is very important that you clean the pH meter between testing each sample so you don't contaminate the samples
- How to clean the pH meter:
- Hold the ph meter over the beaker provided to you
- Use the water bottle to squirt water on the tip and rinse it off
- Using a clean pH meter, put the tip of the pH meter into one of the samples, wait for the reading to stabilize
- Put the lid back on the sample
- Record the pH reading in your Table below
- Clean the pH meter with water over the beaker provided to you
- Go to the next sample
- Continue this procedure until you have a reading for all of the samples
Do one sample at a time. Be sure to take the lid off and to put the lid back on after each sample to ensure that you don't get your samples mixed up. The materials provided for you are for all of the class sections, please do not waste the samples.
Case Scenario/Question: Suppose you have an upset stomach. What would you recommend or use to calm an upset stomach and why? [Remember that gastric juices are very acidic, pH 1 to 3.]