GBHS Router Table assignment

1

Video #1 showed us _____ styles of router machines that we can use in woodworking

1

When inserting a bit into a router machine the operator should" "bottom out" the bit into the collet of the machine.

1

Most modern router bits today are __________ tipped bits.

1

Woodworkers should practice running the router before actually cutting a piece of wood for a project. For edge cutting the bit should be run __________________ the work piece edge

1

The router bit rotation should be in the ___________ direction of the cut so that we do not create a climbing action

1

Plung style routers require the use of a _____________ for the router plate to follow during the cut

1

In the basic set of router bits that were shown in the last part of the video the last one "red colored" bit that was shown is called a ______________ bit.

1

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 1st step can be summarized as:

1

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 2nd step can be summarized as:

1

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 3rd step can be summarized as:

1

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 4th step can be summarized as:

1

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 5th step can be summarized as:

1

GBHS Router Table assignment

Video #1 showed us _____ styles of router machines that we can use in woodworking

When inserting a bit into a router machine the operator should" "bottom out" the bit into the collet of the machine.

Most modern router bits today are __________ tipped bits.

Woodworkers should practice running the router before actually cutting a piece of wood for a project. For edge cutting the bit should be run __________________ the work piece edge

The router bit rotation should be in the ___________ direction of the cut so that we do not create a climbing action

Plung style routers require the use of a _____________ for the router plate to follow during the cut

In the basic set of router bits that were shown in the last part of the video the last one "red colored" bit that was shown is called a ______________ bit.

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 1st step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 2nd step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 3rd step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 4th step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 5th step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 6th step can be summarized as:

Video #1 showed us _____ styles of router machines that we can use in woodworking

When inserting a bit into a router machine the operator should" "bottom out" the bit into the collet of the machine.

Most modern router bits today are __________ tipped bits.

Woodworkers should practice running the router before actually cutting a piece of wood for a project. For edge cutting the bit should be run __________________ the work piece edge

The router bit rotation should be in the ___________ direction of the cut so that we do not create a climbing action

Plung style routers require the use of a _____________ for the router plate to follow during the cut

In the basic set of router bits that were shown in the last part of the video the last one "red colored" bit that was shown is called a ______________ bit.

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 1st step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 2nd step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 3rd step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 4th step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 5th step can be summarized as:

In the 2nd video the host lists out and explains 6 basic steps for the use and setup of a table router in the shop. The 6th step can be summarized as: