Log inSign up for FREE
Library

Lesson 8.2 Common Hand Tools for Woodworking

Last updated almost 5 years ago
21 questions
1

Measuring tools are used to determine linear measurements. (Length, Width, Area)

1

Combinations tapes should be used to determine how high the ceiling is.

1

Measuring squares are used for framing, stairs, rafters, and miter cuts

1

Measure 6/16 or 3/8 inch

1

Measure 13/16 inch

1

Measure 3/4 inch

1

Which line is level?


1

Ripsaw are used for cutting across the grain of wood

1

Crosscut are used for cutting across the grain of wood

1

Coping Saws are using to cur irregular or curved cuts

1

When smoothing rough edges on a piece of wood, you should use a jointer.

1

A Smooth is the smallest planes that can be used with one hand.

1

A mallet should be used to strike the handle of a chisel.

1

When creating irregular shapes, you should use a file.

1

The term Boring is used for hole 1/4 inch and smaller.

1

Hammers are only to be used to drive and remove nails

1

Using the incorrect size screwdriver can provide leverage.

1

Common nails or flat head nails are used for cabinetry

1

Casing or cone-shaped head nails are used for cabinetry

1

Common screws should flush with the surface.

1

Flat screws should flush with the surface.