Lesson 8.5 Common Power Tools for Metalworking
star
star
star
star
star
Last updated almost 5 years ago
11 questions
1
When using a Portable Drill, choose the drill bit you are unsure will work for the job.
When using a Portable Drill, choose the drill bit you are unsure will work for the job.
1
When using a Portable Power Nibbler, do not use compressed air or hands to remove metal chips from cutting.
When using a Portable Power Nibbler, do not use compressed air or hands to remove metal chips from cutting.
1
When using a Cutoff Saw, use compressed air to remove metal chips.
When using a Cutoff Saw, use compressed air to remove metal chips.
1
When using a Cutoff Saw, inspect the blade before cutting and replace is needed.
When using a Cutoff Saw, inspect the blade before cutting and replace is needed.
1
When using a Portable Grinder, check the cutoff wheel to make sure it correct for the job.
When using a Portable Grinder, check the cutoff wheel to make sure it correct for the job.
1
When using a Portable Grinder, removed the wheel if it is 3/4 of the size of the orginal size.
When using a Portable Grinder, removed the wheel if it is 3/4 of the size of the orginal size.
1
When using a Bench Grinder, stand to the infront when turning on and allow to run for a couple of moment before starting your work.
When using a Bench Grinder, stand to the infront when turning on and allow to run for a couple of moment before starting your work.
1
When using a Bench Grinder, do not force the work in the grinding wheel.
When using a Bench Grinder, do not force the work in the grinding wheel.
1
When using a Sheet Metal Brake, you need to clear the mechanism before pressing the metal.
When using a Sheet Metal Brake, you need to clear the mechanism before pressing the metal.
1
When using a Drill Press, do not secure the piece before starting.
When using a Drill Press, do not secure the piece before starting.
1
When using a Drill Press, move the table to the right high before pressing through the work.
When using a Drill Press, move the table to the right high before pressing through the work.