Match the component with its name:
| Draggable item | arrow_right_alt | Corresponding Item |
|---|---|---|
| arrow_right_alt | Capacitor |
| arrow_right_alt | Diode |
| arrow_right_alt | Integrated Circuit |
| arrow_right_alt | Light Emitting Diode |
| arrow_right_alt | Resistor |
| arrow_right_alt | Potentiometer |
Write the name for the component represented by the schematic symbol:
What kind of switch is shown below?
What kind of switch is shown below?
What kind of switch is shown below?
What kind of switch is shown below?
What kind of switch is shown below?
What kind of switch is shown below?
Which components in the schematic below are attached to positive of the power supply?
Which components in the schematic below are attached to negative of the power supply?
Which components in the schematic below are connected to Pin 7 of IC1?
If you were to buld this circuit on a breadboard, you would connect Pins 2 and 6 to each other using a wire.
Match the schematic symbol with its component name:
| Draggable item | arrow_right_alt | Corresponding Item |
|---|---|---|
| arrow_right_alt | Electrolytic capacitor |
| arrow_right_alt | LED |
| arrow_right_alt | Transistor |
| arrow_right_alt | Potentiometer |
| arrow_right_alt | Diode |
| arrow_right_alt | Voltage rails |
