Categorize each item based on whether it describes the motor ports or the sensor ports.

Identify the directional buttons that "move the selection on the screen."

Select all that apply.

Which tab first appears when you start up the brick?

Port View allows you to see what is plugged into each port and what sensor or rotation value it is currently seeing. In which tab is Port View found?

Identify the back button.

Identify the button that turns the brick on and can be used to select options on the screen.

How are projects and files in the File Navigation tab are sorted?

Identify the buttons that navigate up and down lists.

Select all that apply.

How can you clear projects that are no longer needed from the brick?

Select all that apply.

In which tab can you configure the sleep timer and WiFi information?

Identify the buttons that navigate across menu tabs.

Select all that apply.

Place the steps for turning the EV3 brick off into the correct order.

1. Press the [B]ack button until you see the Shut Off screen.
2. Tab [R]ight to highlight the check mark.
3. Press the [C]enter button to initiate shut down

How do you turn on the EV3?

Where can you find the port that is used to connect the brick to a computer using a USB cable?

How do you navigate the menus of the EV3?

Place these steps for clearing a program from the EV3 using the brick's interface in the correct sequence.

1. Use the [C]enter button again to bring up the trash option
2. Use the [C]enter button a third time to choose the trash option
3. Navigate to the File Navigation tab

   

4. Navigate over to the ✅ to select the confirm checkmark icon
5. Use the [C]enter button a fourth time to confirm delete
6. Navigate [D]own to the project you want to delete
7. Use the [C]enter button to select the project

How do you check the motor and sensor values on the EV3?

What does "daisy-chaining" mean in the context of this lesson?

Which of the following describe the [B]ack button?

Select all that apply.

Categorize each item based on the menu tab it represents.

Identify the button(s) that will stop a running program immediately.

Select all that apply.

Where can you find the speaker volume and other settings on the EV3?

Place these steps for clearing a program from the EV3 using a computer and the EV3 software in the correct sequence.

1. Ensure that the brick is turned on and connected to the computer.
2. In the EV3 software on the computer, go to the Hardware page at the bottom-right:

   

   Then, click on the Brick Information icon at the top-left of the Hardware page.
3. Select the Memory Browser from the Brick Information screen.
4. Highlight a program from the Memory Browser screen (area 4 in the image below):

   

   Select Delete (button 7 in the image), and it's gone!