Copy of Lathe Safety Quiz (9/12/2023) - Dolan Corey | Library

Required

1

Provide an example of what could go wrong while homing a machine if you walk away

Required

1

Which axes does a HAAS TL-1 Lathe have? (select all that apply)

Required

1

It is okay to walk away from the machine while it is starting up

Required

1

When setting up a work piece, the ________________ ratio should be kept as low as possible

Required

1

You should use your hands to stop the chuck spinning if it does not stop fast enough

Required

1

Which of the following is acceptable while operating the lathe (select all that apply)

Required

1

Which of the following should be done to the tailstock before shutting the machine down (select all that apply)

Required

1

When knurling, should lubrication be used?

Required

1

What two types of work-holding devices can be used to hold material while working on the lathe?

Required

1

A lathe can be used to turn the following materials? (select all that apply)

Required

1

The ____________ should never be left in the chuck

Required

1

How should the tool-post handle be oriented before shutting the machine down?

Required

1

The TL-1 uses a _________ to hold the material

Required

1

What are the THREE main types of tools that we will be using on the lathe? (select all that apply)

Required

1

The lathe can be used to SAFELY perform what kind of functions (select all that apply)

Required

1

Which of the following should be done when setting up a work piece? (select all that apply)

Required

1

When using a metal lathe, safety glasses are needed when?

Required

1

Which of the following should happen before the machine is shut down?

Required

1

What is the maximum speed of the spindle on a TL-1 with the doors open?

Required

1

When is it acceptable to wear long sleeves on the lathe?

Required

1

When is it acceptable to have loose/dangling jewelry on the lathe?

Required

1

When setting up multiple tools on the TL-1, we often use the top of the lathe as a surface to hold our tools/allen wrenches/stock/files etc. Which side (left or right) of the top of the lathe do we NOT use as a storage surface while operating a machine, and why?