Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.
Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.
Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.
Attempting to extrude the following sketch results in an error message and the extrusion fails. What is the most likely mistake?
A cast iron cylinder serves as a counterbalance that is used in a window manufacturer's double-hung window design. The cylinder has a height of 4 in and a diameter of 2 in. the weight density of cast iron is 0.259 lb/in3. What is the surface area of the cylinder?
What is the value shown on the dial caliper?
Which direction contains duplicate dimensions?
There are six different drawing types in the picture: isometric, oblique, multi-view, one-point perspective, two-point perspective, and three-point perspective. Which is the isometric pictorial? (Click on the correct answer)
When a car company wants to test a new car model before it goes into production, this model car is called a ____________________.
The basic dimension on a detail drawing that indicates the distance from bottom to top.
Which drawing most represents an Orthographic view from a multi-view drawing?
(Click on the correct answer)
Which pair of letters show an unnecessary dimension?
Which pair of letters show dimensions that describe DEPTH?
Most engineering disciplines are a derivative, combination or extension of one of the BIG FOUR. From the list below, select the BIG FOUR fields of engineering.
What term best describes the list of items below?
Must have a minimum of seven different parts once assembled.
Must be the same scale as the engine car.
Must be able to attach to the engine car.
The dimension labeled 2.25 represents the ______ of the object.
Which of the following could be the object represented in the Front, Top, Right view multiview drawing? Click on the correct response.
Match the product/process with the engineering discipline.
| Draggable item | arrow_right_alt | Corresponding Item |
|---|---|---|
Bridges, Buildings, Highways, and Transit Systems | arrow_right_alt | Chemical Engineering |
Plastics, Synthetics and Textiles | arrow_right_alt | Electrical Engineering |
Machine design, gears, and bearings | arrow_right_alt | Civil Engineering |
Power Grid Systems | arrow_right_alt | Mechanical Engineering |
Which orthographic projection matches the given isometric? (Click on the correct answer)
The dimension labeled 1.50 represents the ______ of the object.
Match the given orthographic projection to the corresponding isometric. (Click on the correct answer)
In what step of the Design Process does the designer interview the client?
In the creation of real world objects in CAD, the _______ method is represented by construction processes such as welding (Melting metal together), gluing, mechanical fastening (nuts and bolts), and joinery (wooden connections).
Which line type is the blue arrow pointing towards?
Which figure contains a multi-view drawing that is associated with the given pictorial? Click on the correct figure.
Which line type is the blue arrow pointing towards?
On an orthographic drawing, which view shows both the width and depth?
A short dashed line that represents a feature of the object not shown in the picture is called a _________.
What method did the designer use to create this part?
The advantage of making a midplane extrusion instead of a regular extrusion is...
The most common views used in a three-view, orthographic drawings are... (Choose 3 answers)
An improvement of an existing technological product, system, or method is referred to as a(n) ______________.
What 3D feature utilizes the 2D sketch in order to make the snowman in the image below?
A(n) ____________ is a person who is trained in and uses technological and scientific knowledge to solve practical problems.
Which answer correctly indicated the measured value on the dial caliper?
If a designer / engineer needs to calculate how many quarts of paint are needed to double coat 500 of one particular part in an assembly, what physical property would they need to know?
65.14 m3 is the answer to a physical property calculation. What physical property calculation does it represent?
A cast iron cylinder serves as a counterbalance that is used in a window manufacturer's double-hung window design. The cylinder has a height of 4 in and a diameter of 2 in. the weight density of cast iron is 0.259 lb/in3. What is the volume of the cylinder?
A wood board is one of a dozen different parts in a homemade robot kit. the width, depth, and height dimensions are 2 in x 3 in x 8 in respectively. The board is made from southern yellow pine, which has a weight density of 0.021 lb/in3. What is the weight of the board?
A technical drawing indicates the diameter of a circle is 3.7 in. What is the radius of the same circle?
Put the steps of the PLTW Engineering Design Process in the correct order.
Generate Concepts
Evaluate the Solution
Develop a Solution
Present the Solution
Construct and Test a Prototype
Define the Problem
A systematic problem-solving strategy, with criteria and constraints, used to develop many possible solutions to solve or satisfy human needs or wants is known as a ________.
Even though there are different models of the design process, most begin with this step in the design process.
Generating a large quantity of ideas for a solution to a problem is called ___________.
In a multiview drawing, the front view should be located on the...
In which step of the design process does the designer generate technical drawings?
The basic dimension on a detail drawing that indicates the distance from side to side.
The dimension labeled 1.50 represents the _____ of the object.
What type of drawing/view is shown?
In what step of the Design Process is performance data gathered and results analyzed?
What type of drawing/view is shown?
Which direction contains an unnecessary dimension?
Which of the following is the top view for the figure given? Click on the correct response.
When creating a multiview in Fusion, which view should be placed first?
A cast iron cylinder serves as a counterbalance that is used in a window manufacturer's double-hung window design. The cylinder has a height of 4 in and a diameter of 2 in. The weight density of cast iron is 0.259 lb/in3. What is the weight of the cylinder?
The feature shown in the graphic below is an example of ____
In Fusion, what constraint would you use to place a pin inside a hole that should be able to rotate?
Match the physical property to the corresponding scenario.
| Draggable item | arrow_right_alt | Corresponding Item |
|---|---|---|
A student has designed a part for an assembly. The student has three materials to choose from to make the prototype but the overall weight is a concern. | arrow_right_alt | Volume |
A student has just modeled an attractive and practical hydration system for ultra-distance runners but does not know how many ounces the container holds. | arrow_right_alt | Surface Area |
TCD Designs wants to order enough material to paint 500 puzzle parts. | arrow_right_alt | Mass |
A robotics team wants to calculate the cost to ship their robot to various competitions. FedEx charges $68.59 / 50 lb. | arrow_right_alt | Density |
What is the value shown on the dial caliper?
A wood board is one of a dozen different parts in a homemade robot kit. the width, depth, and height dimensions are 2 in x 3 in x 8 in respectively. The board is made from southern yellow pine, which has a weight density of 0.021 lb/in3. If one quart of paint will cover 12,000 square inches, how many quarts would be needed to paint 2500 boards?
