Drill Press
star
star
star
star
star
Last updated over 1 year ago
6 questions
Required
5
Other Answer Choices:
Table
Chuck
Feed Handles
Power Button
Speed Adjustment
Required
1
I should adjust the moto speed with the power turned off.
I should adjust the moto speed with the power turned off.
Required
1
The longer side of the work piece/board should be kept to the right of the drill bit.
The longer side of the work piece/board should be kept to the right of the drill bit.
Required
1
I need to ensure my piece is properly secured with a vise, clamp, or my hands before drilling.
I need to ensure my piece is properly secured with a vise, clamp, or my hands before drilling.
Required
1
If using a keyed chuck, I should leave the chuck key in the chuck while using the machine.
If using a keyed chuck, I should leave the chuck key in the chuck while using the machine.
Required
1
I should use a scratch awl or center punch to mark the center of a hole before drilling.
I should use a scratch awl or center punch to mark the center of a hole before drilling.