Log in
Sign up for FREE
arrow_back
Library

4/2 - Warmup (SB-D3)

star
star
star
star
star
Last updated almost 2 years ago
5 questions
1
5.6.A
1
5.2.B
1
5.6.B
1
5.2.B
1
5.6.B
Question 1
1.

Draggable itemarrow_right_altCorresponding Item
arrow_right_alt
arrow_right_alt
arrow_right_alt
arrow_right_alt
Question 2
2.

Question 3
3.

Question 4
4.

Question 5
5.

Match the titles on the left to the correct definition on the right.
Open circuit
The path that electricity flows
Force
Allows an electrical current to flow through a continuous path
Circuit
A push or a pull
Closed circuit
Does not allow an electrical current to flow through a continuous path
A student rolled a toy car down a ramp with different surfaces - wood, carpet, and tile. The student measured the distance that the car traveled. Which question is the student most likely investigating?
Does the height of the ramp affect the distance the car rolls down the ramp?
Does the type of surface affect the speed the car rolls down the ramp?
Does the type of surface affect the distance the car rolls down the ramp?
Does the type of car affect the distance the car rolls down the ramp?
Which light bulbs will remain lit if the wire is cut at Position X?


Select TWO correct answers.
Bulb A
Bulb B
Bulb C
A student designs an experiment to test the effect of the width of a piece of elastic on the elastic's ability to stretch. The student selects four pieces of elastic with different widths but the same length. The student then attaches blocks with different masses to the pieces of elastic. The results of the student's experiment are shown below.


What should the student do to improve this experiment?
Use blocks of equal mass on the four pieces of elastic
Use blocks with enough mass to cause the four pieces of elastic to break
Use more than four pieces of elastic and four blocks
Use four pieces of elastic with different lengths but the same width
This circuit has three lightbulbs and a bell.


Which procedure will result in only the blue lightbulbs operating?
Close switches 1 and 2 and leave switch 3 open
Close switch 3 and leave switches 1 and 2 open
Close switches 2 and 3 and leave switch 1 open
Close switch 2 and leave switches 1 and 3 open Switch 3