What are the four most common cylinder layouts? (Use the order from the article.)
Question 12
12.
Question 13
13.
Calculate horsepower.
Torque: 52.6 ft*lb
RPM: 710
Round to the tenth decimal place.
0
6
7.111
7.1
Calculate Horsepower.
Torque: 17.8 ft*lb
RPM: 921
Round to the tenth decimal place.
3.1
4
3.3
10
Calculate RPM.
Torque: 9.8 ft*lb
Horsepower: 14.4
Round to the nearest whole number.
7717
7000
10,000
4000
598
Calculate torque.
RPM: 47
Horsepower: 12.3
Round to the tenth decimal place.
1374.5
1375
1374.0
1200
Which of the following happens during intake?
The air-fuel mixture gets drawn in through intake valves and sent to the cylinders.
Both intake and exhaust valves are closed during the compression stroke. As pistons move up, the air and fuel mixture is compressed.
The spark plugs ignite the air-fuel mixture with a spark, creating a small explosion. This causes the pistons to get pushed down forcefully.
The final process in the cycle is the exhaust stroke. The exhaust valve opens, and gases created during combustion are expelled as the piston moves back up.
What do diesel engines use to ignite their air-fuel mixture?
Spark Plugs
High Compression Ratios
Fuel/Air
What aspect of an engine helps determine the amount of power an engine can produce?
# of Cylinders
Engine Color
Material
Gas Type
What is the primary difference between a motor and an engine?
engines use an internal source (fuel), while motors require an external power source (electricity)
motors use an internal source (fuel), while engines require an external power source (electricity)
engines use only gasoline, while motors require diesel fuel