Makerspace Safety Training Session - Chris Bhadra | Laabri

1

Which of the following is the most important rule in a makerspace?

A) Work as quickly as possible to finish your project.

B) Always wear appropriate safety gear and follow instructions.

C) Try out new tools without asking for help.

D) Leave your materials and tools wherever you last used them.

1

What should you do if you see an unsafe situation in the makerspace?

A) Ignore it since it’s not your responsibility.

B) Immediately tell the instructor or supervisor.

C) Try to fix it yourself, even if you’re unsure how.

D) Continue working and hope nothing bad happens.

1

True or False: You should always tie back long hair and remove loose jewelry when using tools.

True

False

1

Why is it important to have good ventilation in a makerspace?

A) It makes the space smell better.

B) It helps keep dust and fumes from machines like laser cutters or soldering irons from building up.

C) It keeps the room warm.

D) It helps with organization.

1

What should you do before using a tool or machine for the first time?

A) Watch a tutorial online and figure it out yourself.

B) Ask a friend who has used it before.

C) Get trained and ask the instructor for permission.

D) Just start using it and learn as you go.

1

What type of materials should NEVER be placed in a laser cutter?

A) Acrylic and wood

B) Paper and cardboard

C) PVC and unknown plastics

D) Plywood and leather

1

True or False: It’s safe to leave the laser cutter unattended while it is running.

True

False

1

What should you do if you notice excessive smoke or flames while using the laser cutter?

A) Let it finish the job and then check it.

B) Immediately stop the machine and alert the instructor.

C) Open the machine while it is still running to stop the fire.

D) Ignore it; small fires are normal.

1

What should you check before starting a 3D print?

A) The filament is loaded correctly, and the build plate is level.

B) The printer is set to the fastest speed possible.

C) There is plenty of loose material around the printer.

D) The printer has enough ink.

1

Why should you wait for a 3D print to cool before removing it?

A) The print may still be soft and can warp.

B) The printer needs time to reset before the next print.

C) The instructor needs to inspect the print first.

D) It makes it easier to remove supports.

1

What type of safety gear should always be worn when using woodworking tools?

A) Safety goggles and a dust mask

B) Flip-flops and a hoodie

C) A scarf and loose clothing

D) No safety gear is needed

1

True or False: It’s okay to leave a saw blade spinning after making a cut as long as you don’t touch it.

True

False

1

What is the safest way to use a hand saw?

A) Cut as fast as possible to finish quickly.

B) Hold the wood securely and use slow, controlled strokes.

C) Push down hard to make the blade cut faster.

D) Use it without a cutting guide or clamps.

1

Why should you never use your hands to clear away sawdust near a running saw?

A) Sawdust feels soft and won’t hurt your hands.

B) The saw blade could still be moving, and you could get cut.

C) It’s important to keep working without stopping.

D) You should always blow the dust away instead.

1

What should you check before turning on a power saw?

A) The blade is secure, and the workpiece is clamped down.

B) The saw is plugged into an extension cord.

C) The blade is dull to avoid cutting too quickly.

D) The saw is covered in sawdust.

1

What is the biggest safety risk when using a hot glue gun?

A) Glue cooling too fast

B) Burning yourself or others with the hot glue or gun tip

C) Running out of glue sticks

D) Making a mess

1

True or False: It’s okay to touch the glue right after it comes out of the gun to check if it’s dry

True

False

1

What should you do if you burn yourself with hot glue?

A) Wipe it off with your hand quickly.

B) Run the burn under cool water and tell an instructor.

C) Keep working and ignore it.

D) Press a cold metal object against it.

1

Why should you never use a frayed or damaged power cord?

A) It looks messy.

B) It might cause the tool to not work properly.

C) It could cause an electric shock or fire.

D) It makes the tool harder to hold.

1

What is the safest way to unplug a tool or machine?

A) Pull the cord from a distance.

B) Yank the cord out as fast as possible.

C) Gently pull the plug from the socket while holding the base.

D) Use scissors to cut the cord before unplugging.