What component in the suspension system combines the shock, spring, and upper control arm into one unit?
What type of steering system has a pitman arm?
What does the P stand for in P205/55R16 89H?
What is used to reduce the amount of effort needed to turn the steering wheel?
Which of the following is the best UTQG rating for traction?
At what distance are wear indicator bars set?
What type of pattern should be used when tightening lug nuts?
What type of suspension system includes a rigid or solid axle?
What type of axle is also a part of the drivetrain system?
Which of the following is NOT used by magnetic ride systems?
What type of springs are large rods of steel that twist?
What of the following would be an example of a Euro-metric tire size?
What type of tire is designed so the independent tread blocks and grooves have the same tread pattern across the whole tire?
Which of the following statements is true?
What part of the tire connects the shoulder to the bead?
What do the grooves in a tire's tread primarily help with?
What is the primary function of shock absorbers in the suspension system?
Technician A says that correct tire pressure is critical to tire wear and vehicle handing. Technician B says that a tire pressure monitoring system is used to alert the driver if any tire is significantly low on pressure. Who is correct?
Technician A says that a “V” speed rated tire has met higher speed standards than a “T” speed rated tire. Technician B says that an “H” speed rated tire has a higher speed rating than both “V” and “T” speed rated tires. Who is correct?
Technician A says that most front wheel drive vehicles use parallelogram steering systems. Technician B says that an idler arm is used with rack and pinion steering systems. Who is correct?
Technician A says that a “C” load range tire has a higher load carrying capacity than a “D” load range tire. Technician B says that an “E” load range tire has a higher load carrying capacity than a “C” or a “D”. Who is correct?
Technician A says that when inflating tires, you should check the tire placard for the correct recommended pressure. Technician B says that you can tell when a tire is fully inflated by looking at it. Who is correct?
What is the purpose of the steering system? What is the purpose of the suspension system?
What are run flat tires? List three technologies that are being used in run flat technology.