IED Quarter 1 Test

Last updated 3 months ago

41 questions

1

0

1

0

2

1

2

1

0

1

3

1

3

1

Library

IED Quarter 1 Test

Last updated 3 months ago

41 questions

1

There are six different drawing types in the picture: isometric, oblique, multi-view, one-point perspective, two-point perspective, and three-point perspective. Which is the isometric pictorial? (Click on the correct answer)

1

Which drawing most represents an Orthographic view from a multi-view drawing?
(Click on the correct answer)

1

0

1

Which of the following could be the object represented in the Front, Top, Right view multiview drawing? Click on the correct response.

0

Draggable item		Corresponding Item

2

Which orthographic projection matches the given isometric? (Click on the correct answer)

1

2

Match the given orthographic projection to the corresponding isometric. (Click on the correct answer)

1

0

1

Which figure contains a multi-view drawing that is associated with the given pictorial? Click on the correct figure.

1

3

1

3

1

Which of the following is the top view for the figure given? Click on the correct response.

1

Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.

Attempting to extrude the following sketch results in an error message and the extrusion fails. What is the most likely mistake?

The shape is too complex.

The profile is not dimensioned properly.

The profile is not a closed loop.

The sketch tool has not been activated.

You cannot extrude arc and rectangular shapes at the same time.

There are six different drawing types in the picture: isometric, oblique, multi-view, one-point perspective, two-point perspective, and three-point perspective. Which is the isometric pictorial? (Click on the correct answer)

When a car company wants to test a new car model before it goes into production, this model car is called a ____________________.

The basic dimension on a detail drawing that indicates the distance from bottom to top.

Which drawing most represents an Orthographic view from a multi-view drawing?
(Click on the correct answer)

Which pair of letters show dimensions that describe DEPTH?

Most engineering disciplines are a derivative, combination or extension of one of the BIG FOUR. From the list below, select the BIG FOUR fields of engineering.

What term best describes the list of items below?
Must have a minimum of seven different parts once assembled.
Must be the same scale as the engine car.
Must be able to attach to the engine car.

The dimension labeled 2.25 represents the ______ of the object.

Which of the following could be the object represented in the Front, Top, Right view multiview drawing? Click on the correct response.

Match the product/process with the engineering discipline.

Draggable item		Corresponding Item
Power Grid Systems		Chemical Engineering
Bridges, Buildings, Highways, and Transit Systems		Electrical Engineering
Machine design, gears, and bearings		Civil Engineering
Plastics, Synthetics and Textiles		Mechanical Engineering

Which orthographic projection matches the given isometric? (Click on the correct answer)

The dimension labeled 1.50 represents the ______ of the object.

Match the given orthographic projection to the corresponding isometric. (Click on the correct answer)

In what step of the Design Process does the designer interview the client?

In the creation of real world objects in CAD, the _______ method is represented by construction processes such as welding (Melting metal together), gluing, mechanical fastening (nuts and bolts), and joinery (wooden connections).

Which line type is the blue arrow pointing towards?

Which figure contains a multi-view drawing that is associated with the given pictorial? Click on the correct figure.

Which line type is the blue arrow pointing towards?

hidden line

construction line

object line

center line

On an orthographic drawing, which view shows both the width and depth?

top

front

left

right

A short dashed line that represents a feature of the object not shown in the picture is called a _________.

What method did the designer use to create this part?

The advantage of making a midplane extrusion instead of a regular extrusion is...

just something the directions asked for, no advantage

to make a mid sized sketch

to keep Fusion from making the same extrusion every time

to keep the sketch centered in the object

The most common views used in a three-view, orthographic drawings are... (Choose 3 answers)

An improvement of an existing technological product, system, or method is referred to as a(n) ______________.

What 3D feature utilizes the 2D sketch in order to make the snowman in the image below?

A(n) ____________ is a person who is trained in and uses technological and scientific knowledge to solve practical problems.

technician

engineer

scientist

craftsperson

Put the steps of the PLTW Engineering Design Process in the correct order.

Evaluate the Solution
Develop a Solution
Present the Solution
Generate Concepts
Define the Problem
Construct and Test a Prototype

A systematic problem-solving strategy, with criteria and constraints, used to develop many possible solutions to solve or satisfy human needs or wants is known as a ________.

System Process

Systematical Analysis

Design Process

Solution Model

Even though there are different models of the design process, most begin with this step in the design process.

Communicating Results

Define / Identify a Problem

Create a Working Drawing

Selecting an Approach

Generating a large quantity of ideas for a solution to a problem is called ___________.

Brainstorming

Implementation

Ideation

Constraining

In a multiview drawing, the front view should be located on the...

bottom right

top right

bottom left

top left

In which step of the design process does the designer generate technical drawings?

The basic dimension on a detail drawing that indicates the distance from side to side.

The dimension labeled 1.50 represents the _____ of the object.

What type of drawing/view is shown?

In what step of the Design Process is performance data gathered and results analyzed?

What type of drawing/view is shown?

Which of the following is the top view for the figure given? Click on the correct response.

Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.

lock

fix

concentric

offset

pattern

inscribed polygon

Attempting to extrude the following sketch results in an error message and the extrusion fails. What is the most likely mistake?

The shape is too complex.

The profile is not dimensioned properly.

The profile is not a closed loop.

The sketch tool has not been activated.

You cannot extrude arc and rectangular shapes at the same time.

When a car company wants to test a new car model before it goes into production, this model car is called a ____________________.

mathematical model

prototype

concept model

graphical model

sample

The basic dimension on a detail drawing that indicates the distance from bottom to top.

overall block

depth

height

stack

length

width

Which pair of letters show dimensions that describe DEPTH?

B & E

E & F

C & F

A & D

D & F

B & C

Most engineering disciplines are a derivative, combination or extension of one of the BIG FOUR. From the list below, select the BIG FOUR fields of engineering.

Industrial

Welding

Biomedical

Chemical

Mechanical

Electrical

Computer

Civil

Military

Environmental

Aeronautical

What term best describes the list of items below?
Must have a minimum of seven different parts once assembled.
Must be the same scale as the engine car.
Must be able to attach to the engine car.

Invention

Innovation

Indicators

Deliverables

Design Constraints

Decision Matrix

Design Brief

Design Statement

The dimension labeled 2.25 represents the ______ of the object.

side

depth

strength

volume

width

length

density

height

Match the product/process with the engineering discipline.

Power Grid Systems

Chemical Engineering

Bridges, Buildings, Highways, and Transit Systems

Electrical Engineering

Machine design, gears, and bearings

Civil Engineering

Plastics, Synthetics and Textiles

Mechanical Engineering

The dimension labeled 1.50 represents the ______ of the object.

width

strength

density

mass

depth

height

length

In what step of the Design Process does the designer interview the client?

Develop a Solution

Define a Problem

Generate Concepts

Present the Solution

Evaluate Solution

In the creation of real world objects in CAD, the _______ method is represented by construction processes such as welding (Melting metal together), gluing, mechanical fastening (nuts and bolts), and joinery (wooden connections).

subtractive

multiplicative

additive

destructive

building

Which line type is the blue arrow pointing towards?

center line

construction line

object line

hidden line

circle line

Which line type is the blue arrow pointing towards?

hidden line

construction line

object line

center line

On an orthographic drawing, which view shows both the width and depth?

top

front

left

right

A short dashed line that represents a feature of the object not shown in the picture is called a _________.

construction line

object line

isolated line

hidden line

center line

What method did the designer use to create this part?

Explosion

Skeletal

Assembly

Subtractive method

Additive method

The advantage of making a midplane extrusion instead of a regular extrusion is...

just something the directions asked for, no advantage

to make a mid sized sketch

to keep Fusion from making the same extrusion every time

to keep the sketch centered in the object

The most common views used in a three-view, orthographic drawings are... (Choose 3 answers)

back

front

right

top

bottom

left

An improvement of an existing technological product, system, or method is referred to as a(n) ______________.

serendipitous event

technological change

inventio

innovation

chaotic improvement

What 3D feature utilizes the 2D sketch in order to make the snowman in the image below?

circular pattern

spherical

extrude

loft

revolve

A(n) ____________ is a person who is trained in and uses technological and scientific knowledge to solve practical problems.

technician

engineer

scientist

craftsperson

Put the steps of the PLTW Engineering Design Process in the correct order.

Evaluate the Solution

Develop a Solution

Present the Solution

Generate Concepts

Define the Problem

Construct and Test a Prototype

A systematic problem-solving strategy, with criteria and constraints, used to develop many possible solutions to solve or satisfy human needs or wants is known as a ________.

System Process

Systematical Analysis

Design Process

Solution Model

Even though there are different models of the design process, most begin with this step in the design process.

Communicating Results

Define / Identify a Problem

Create a Working Drawing

Selecting an Approach

Generating a large quantity of ideas for a solution to a problem is called ___________.

Brainstorming

Implementation

Ideation

Constraining

In a multiview drawing, the front view should be located on the...

bottom right

top right

bottom left

top left

In which step of the design process does the designer generate technical drawings?

Evaluate the Solution

Generate Concepts

Construct and Test a Prototype

Define the Problem

Present the Solution

Develop a Solution

The basic dimension on a detail drawing that indicates the distance from side to side.

stack

width

length

depth

height

overall block

The dimension labeled 1.50 represents the _____ of the object.

height

length

width

volume

density

depth

What type of drawing/view is shown?

oblique

exploded

perspective

section

multiview

In what step of the Design Process is performance data gathered and results analyzed?

Define a Problem

Generate Concepts

Develop a Solution

Construct and Test Prototype

Present the Solution

What type of drawing/view is shown?

exploded

isometric

perspective

oblique

section

multiview

The feature shown in the graphic below is an example of ____

loft

pattern

sweep

polygon

IED Quarter 1 Test

IED Quarter 1 Test

There are six different drawing types in the picture: isometric, oblique, multi-view, one-point perspective, two-point perspective, and three-point perspective. Which is the isometric pictorial? (Click on the correct answer)

Which drawing most represents an Orthographic view from a multi-view drawing?(Click on the correct answer)

Which of the following could be the object represented in the Front, Top, Right view multiview drawing? Click on the correct response.

Which orthographic projection matches the given isometric? (Click on the correct answer)

Match the given orthographic projection to the corresponding isometric. (Click on the correct answer)

Which figure contains a multi-view drawing that is associated with the given pictorial? Click on the correct figure.

Which of the following is the top view for the figure given? Click on the correct response.

Choose the CAD sketching tool that has been used to create the image on the right from the image on the left.

Attempting to extrude the following sketch results in an error message and the extrusion fails. What is the most likely mistake?

There are six different drawing types in the picture: isometric, oblique, multi-view, one-point perspective, two-point perspective, and three-point perspective. Which is the isometric pictorial? (Click on the correct answer)

When a car company wants to test a new car model before it goes into production, this model car is called a ____________________.

The basic dimension on a detail drawing that indicates the distance from bottom to top.

Which drawing most represents an Orthographic view from a multi-view drawing?(Click on the correct answer)

Which pair of letters show dimensions that describe DEPTH?

Most engineering disciplines are a derivative, combination or extension of one of the BIG FOUR. From the list below, select the BIG FOUR fields of engineering.

What term best describes the list of items below?Must have a minimum of seven different parts once assembled.Must be the same scale as the engine car.Must be able to attach to the engine car.

The dimension labeled 2.25 represents the ______ of the object.

Which of the following could be the object represented in the Front, Top, Right view multiview drawing? Click on the correct response.

Match the product/process with the engineering discipline.

Which orthographic projection matches the given isometric? (Click on the correct answer)

The dimension labeled 1.50 represents the ______ of the object.

Match the given orthographic projection to the corresponding isometric. (Click on the correct answer)

In what step of the Design Process does the designer interview the client?

In the creation of real world objects in CAD, the _______ method is represented by construction processes such as welding (Melting metal together), gluing, mechanical fastening (nuts and bolts), and joinery (wooden connections).

Which line type is the blue arrow pointing towards?

Which figure contains a multi-view drawing that is associated with the given pictorial? Click on the correct figure.

Which line type is the blue arrow pointing towards?

On an orthographic drawing, which view shows both the width and depth?

A short dashed line that represents a feature of the object not shown in the picture is called a _________.

What method did the designer use to create this part?

The advantage of making a midplane extrusion instead of a regular extrusion is...

The most common views used in a three-view, orthographic drawings are... (Choose 3 answers)

An improvement of an existing technological product, system, or method is referred to as a(n) ______________.

What 3D feature utilizes the 2D sketch in order to make the snowman in the image below?

A(n) ____________ is a person who is trained in and uses technological and scientific knowledge to solve practical problems.

Put the steps of the PLTW Engineering Design Process in the correct order.

A systematic problem-solving strategy, with criteria and constraints, used to develop many possible solutions to solve or satisfy human needs or wants is known as a ________.

Even though there are different models of the design process, most begin with this step in the design process.

Generating a large quantity of ideas for a solution to a problem is called ___________.

In a multiview drawing, the front view should be located on the...

In which step of the design process does the designer generate technical drawings?

The basic dimension on a detail drawing that indicates the distance from side to side.

The dimension labeled 1.50 represents the _____ of the object.

What type of drawing/view is shown?

In what step of the Design Process is performance data gathered and results analyzed?

What type of drawing/view is shown?

Which of the following is the top view for the figure given? Click on the correct response.

Which drawing most represents an Orthographic view from a multi-view drawing?
(Click on the correct answer)

Which drawing most represents an Orthographic view from a multi-view drawing?
(Click on the correct answer)

What term best describes the list of items below?
Must have a minimum of seven different parts once assembled.
Must be the same scale as the engine car.
Must be able to attach to the engine car.