Log in
Sign up for FREE
arrow_back
Library
Woodshop Safety Quiz RJH
By Payton Wren
star
star
star
star
star
Share
share
Last updated almost 7 years ago
25 questions
Add this activity
Note from the author:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CAB/Millwork general safety
Question 1
1.
Question 2
2.
Question 3
3.
Question 4
4.
Question 5
5.
Question 6
6.
Question 7
7.
Question 8
8.
Question 9
9.
Question 10
10.
Question 11
11.
Question 12
12.
Question 13
13.
Question 14
14.
Question 15
15.
Question 16
16.
Question 17
17.
Question 18
18.
Question 19
19.
Question 20
20.
Question 21
21.
Question 22
22.
Question 23
23.
Question 24
24.
Question 25
25.
Who is responsible for cleaning up your work area?
A Chuck
B Woodshop Teacher
C Your Partner
D You
To whom do you report unsafe conditions in the woodshop?
A Instructor or Supervisor
B 911
C Janitor
D Principal
The most important aspect of a safe shop is a
A Safe Shop
B Rule Book
C Clean Shop
D Emergency Action Plan
Which saws are free hand saws?
A Miter and Band
B Scroll and Panel
C Band and Scroll
D Table and scroll
When do you turn a saw on?
A Just before you place the wood on the saw blade and begin the cut
B When the wood is on the saw blade
C a minute before the cut so blade can reach full speed
D when you are ready
When do you turn a saw off?
A When you're ready
B When you've cut mostly through the wood
C After you have completed the cut and saw blade is clear from wood
D At the end of the day.
What adjustment should be made to the drill press when using a larger bit?
A Use a slower speed
B Use a faster speed
C No adjustment
D None of the Above
How do you decide the speed of the wood lathe?
A Ask a friend
B Refer to chart
C Guess
D Test different speeds
How much weight should you apply to the belt sander while sanding?
A Just enough to hold it in place
B As much weight as able to
C A very light amount
D No weight at all
Which sander is used to sand corners and tight places?
A Detail Sander
B Half-size sander
C Mouse Sander
D Spindle Sander
Which Sander is used to sand curved edges and the inside of curved cutouts?
A Finishing sander
B Palm Sander
C Orbital Sander
D Spindle Sander
Why is it not necessary to move the blade guard by hand on a circular saw?
A It does not move
B you need a special tool to move it
C it is designed to retract on its own
D Your hand will fall off
Power for pneumatic nail guns is found in
A Power Outlets
B Battery
C Air Hoses
D Generators
What tool is used to cut slots in wood for biscuit jointing?
A Joiner
B Plate joiner
C Biscuit joiner
D Slot joiner
"cleaning your work area" means
A Sweeping up any mess you made
B Throwing away sawdust
C Cleaning all tools and machinery used
D Putting away all hand tools used
E All of the above
When you leave the shop you must
A Clean up your workspace
B Put away all tools
C Put away safety glasses
D all of the above
When cutting tight curves on the band saw, you should
A Do it quickly
B Make relief cuts
C Do it slowly
D Back out halfway through the cut and start from the other end
Before making a cut on the Table Saw you should
A Check Blade height
B Set the fence
C Make sure nobody is standing behind you
D All of the above
On the drill press, large bits should be used at ___________ speeds and small drill bits should be used at ____________ speeds.
A Slower, Faster
B Faster, Slower
C Slow, Slower
D Fast, Faster
On the jointer, never cut wood shorter than
A 12"
B Length of your arm
C 6"
D 3"
The Planer is used to
A Straighten out bows and/or warps in your wood
B Change the outer texture of the wood
C Plane your wood out to a desired thickness smoothly
D Compress wood pieces together
The Oscillating Spindle sander is used to sand
A Flat surfaces
B Curved edges
C 90 degree angles
D Upside down
When starting a cut with the miter saw, you should start with the blade
A Touching the wood where you wish to cut
B Up and away from the wood until the blade reaches full speed
C Pushed firmly onto the wood where you want to cut
D None of the above
On the panel saw you should always
A Let go of the saw as soon as you are done cutting
B Push both sides of the stock you have just cut away from the blade to prevent possible kickback
C Stop the saw while touching the wood
D Start the saw while touching the wood
The panel saw is used for
A Ripping and cross cutting metal
B Ripping and cross cutting large sheets of stock
C Ripping and cross cutting small projects
D None of the above